2019 Gehl RT210 GEN:3 Track Loader

Call for Price

RT210 GEN:3 Track Loader



Key Features
  • Rated Operating Capacity at 35% Tipping Load (kg): 2,100 lbs. (953)
  • Net Power (kW): 70.7 hp (52.7)
  • Lift Height (mm): 128" (3251)
  • Overall Operating Height - Fully Raised: 168 in.
  • Height to Hinge Pin - Fully Raised: 128 in.
  • Reach - Fully Raised: 34.5 in.
  • Dump Angle - Fully Raised: 39 deg.
  • Dump Height - Fully Raised: 98 in.
  • Maximum Rollback Angle - Fully Raised: 102.5 deg.
  • Overall Height at ROPS: 83.1 in.
  • Overall Length with Bucket - Standard Counterweight: 148.1 in.
  • Overall Length without Bucket - Standard Counterweight: 116.5 in.
  • Specified Height: 67.7 in.
  • Reach at Specified Height: 31.3 in.
  • Dump Angle at Specified Height: 75 deg.
  • Maximum Rollback Angle at Ground: 30 deg.
  • Carry Position: 8.2 in.
  • Maximum Rollback Angle at Carry Position: 31.6 deg.
  • Digging Position - Below Ground: +0.6 in.
  • Angle of Departure with Standard Counterweight: 29.2 deg.
  • Ground Clearance: 13.2 in.
  • Track Gauge: 51.7 in.
  • Track Shoe Width: 17.7 in.
  • Crawler Base: 58.4 in.
  • Overall Width - Less Bucket: 69.5 in.
  • Bucket Width: 73.9 in.
  • Clearance Radius - Front With Bucket: 94.6 in.
  • Clearance Radius - Rear with Standard Counterweight: 64.6 in.
  • Maximum Rollback at Specified Height: 66.8 deg.
  • Angle of Approach: 90 deg.
  • Grouser Height: 1 in.
  • Operating Capacity at 35% Tipping Load: 2,100 lb.
  • Operating Capacity at 50% Tipping Load: 3,000 lb.
  • Tipping Load: 6,000 lb.
  • Operating Weight: 9,890 lb.
  • Make/Model: Yanmar/4TNV98TCT-NMSL Tier IV
  • Type: 4-Stroke Turbo
  • Displacement/Cylinders: 203 cu.in./4
  • Gross Power @ rpm: 72 hp @ 2500
  • Net Power @ rpm: 70.7 hp @ 2500
  • Peak Torque @ rpm: 206 ft.-lb. @ 1700
  • Oil Pump Capacity: 11 qts.
  • Alternator Voltage/Amperage: 14V/95A
Track Drives
  • Drawbar Pull/Tractive Effort: 11,489 lb.
  • Track Type/Track Rollers/Roller Type: Rubber/5/Steel
  • Track Width: 17.7 in.
  • Ground Pressure: 4.7 psi
  • Bucket Breakout - Tilt Cylinder: 6,631 lb.
  • Bucket Breakout - Lift Cylinder: 6,481 lb.
  • Ground Speed - Single Speed: 6.1 mph
  • Ground Speed - Two Speed: 8.9 mph
  • Fuel Tank: 24 gal.
  • Hydraulic Reservior Tank: 13.8 gal.
  • Coolant Capacity: 3.8 gal.
  • Auxiliary Hydraulic Flow - Rated Speed: 21.8 gpm
  • Hight-Flow Hydraulic Flow - Rated Speed: 35.9 gpm
  • Transmission Pump Type: Axial Piston
  • Motor Type: Axial Piston with Planetary Gear Box Reduction
Electronic System
  • Battery Volts: 12V
  • Cold Cranking Amps at Temperature: 850 CCA @ 0 deg. F
  • The Gehl RT210 GEN:3 Compact Track Loader was designed from the ground up...
  • Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Operator's Cabin
  • The extra-large, state-of-the art operator's station on the RT210 GEN:3 Track Loader is designed for optimal operator comfort resulting in more productivity.
  • Level II FOPS is standard equipment.
  • Cab forward design enhances the view to the bucket.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional electronic attachment control - 14-pin connector that allows operation of all attachments.
  • Controls on the RT210 GEN:3 Compact Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include: Joystick Sensitivity Position Reaction Engine Response AntiStall Pump Swash Plate Position
  • Single button allows simple scrolling and selection of various display functions.
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
Engine Features
  • The RT210 GEN:3 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Hydraulics Features
  • The RT210 GEN:3 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.
  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency while AntiStall technology keeps the power flowing.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Attachment System
  • The RT210 GEN:3 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.
  • All-Tach® system manually engages and disengages with a single lever.
  • Both systems are compatible with all universal-style track loader attachments.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
Lift Arm
  • The robust lift-arm on the RT210 GEN:2 Compact Track Loader is designed for optimal strength, visibility and capacity.
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
  • Serviceability is very important to our customers. The RT210 GEN:3 is sure to exceed your service expectations.
  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.



Engine Type
Engine Manufacturer
72 hp
Rated RPM
2500 rpm
Fuel Capacity
24 gal.


SAE Rated Operating Capacity
3,000 lb. (50% Tipping Load)
Max Ground Speed
8.9 mph
Tire Size
17.7 in. Track
148.1 in.
69.5 in.
83.1 in.
9,890 lb.


Related Products